Siemens HiPath 4000 - Switching to Speakerphone Mode; Switching to the Handset

Making Calls – Basic Functions
41
Step by step
Suggestions for using speakerphone mode:
• Tell the other party that speakerphone mode is ac-
tive.
• Adjust the call volume while speakerphone mode is
active.
• The ideal distance between the user and the phone
in speakerphone mode is 50 cm.
Switching to speakerphone mode
Prerequisite: You are conducting a call via the handset.
n ] Hold down the key and replace the handset. Then re-
lease the key and proceed with your call.
if nec. X Set the call volume.
US mode
If your communication system is set to US mode (con-
tact your service personnel), you do not have to hold
down the speaker key when replacing the handset
when switching to speakerphone mode.
n Press the key shown.
] Replace the handset. Proceed with your call.
if nec.
X Set the call volume.
Switching to the handset
Prerequisite: You are conducting a call in speaker-
phone mode.
^ Lift the handset.
n The key shown goes out.