Making Calls via Multiple Lines (Multi-Line)
123
Step by step
Identifying the line used
If several lines are occupied at the same time, you can
determine which one you are currently using for a call.
With a programmed sensor key
S Press the "Line in Use" programmable sensor key.
Via the menu
v Open the service menu Æ page 37.
Select and confirm the option shown.
Select and confirm the option shown.
The line number and status of the line currently in use
are displayed Æ page 30.
Making calls on multiple lines alter-
nately
Prerequisite 1: The relevant service personnel have
specified that when you change lines, the lines are hold
and can only be disconnected by replacing the handset
or pressing the release key.
Prerequisite 2: You are connected to multiple parties
via two or more lines. These may be callers
(Æ page 117) or called parties (Æ page 119).
You are making a call, for example, on line 1. The line
key of the station on hold blinks slowly.
T Press the flashing line key 2. The first call party is on
hold on line 1.
T Press the flashing line key 1. The second call party is on
hold on line 2.
You can switch between lines as often as you wish.
More features? g
Show used line?
To Next Page
Loading...
