Siemens HiPath 4000 - All Service Menu Functions

All Service Menu Functions
All Service Menu Functions
v Open the service menu and e select a function Æ page 37.
Alternatively, you can use service codes (see table), e.g. 2 1 for "Second call on/off".
1 Destinations
2 Feature Settings
3 Use speed dialing
4 Prog. feature key
5 Voice Mail Service
6 PIN and Authorization
7 Save reminder
8 More features
9 Phone test
10 Mobile HFA Logoff
1 Set up call forwarding
2 Save speed dial number
3 Saved number redial
4 Repdial
5
Direct Station Select
6
Save forwarding station no.
7 Call log
1 Second call
2 Do not disturb on/off
3 Spk. call protect on/off
4 Join/leave hunt group
5 Call forwarding on/off
6 Display/switch off forwarding sta-
tion no.
7 Ringer cutoff off/on
1 Access voicemail?
2 Leave voicemail?
1 PIN 1 (option: network-wide)
2 PIN 2
3 PIN 3
4 PIN 4
5 PIN 5
6 Deactivate PIN?
7 Change COS
1
Tone dialing (DTMF suffix dialing) on
2 Display suppression on
3 Display suppression off
4 Call tracing (caller)
5 Use paging
6 Show used line
7 Privacy on
8 Privacy off
1 LED test
2 Display test
3 Key test
4 Audio test
5 Asset ID
6 Firmware version
7 Power level
1 Variable call forw.
2 Fixed call forw.
3 Call forwarding for internal
4 Call forwarding for external
5 Call forward. busy
6 Call forward. no reply
7 Call forward. busy no reply
1 Unanswered calls
2 Incoming calls
3 Outgoing calls
1 Speaker
2 Handset
3 Ringer volume
4 Ring tone
5 Alert tone
6 Speakerphone mode