Siemens HiPath 4000 - System-Wide Parking; Manually Parking a Call; Retrieving a Parked Call

Step by step
Making Calls – Convenience Functions
70
System-wide parking
On HiPath 4000 systems, you can park up to
ten internal and/or external calls and retrieve them on
another phone.
There are two options for parking a call:
• Automatic park
• Manual park
You cannot park calls if:
• All park positions are busy
• The park position you wish to use is busy
• The station is an attendant console
• The call is a consultation call
• The call is in a conference
Manually parking a call
You can manually park a call in a free park position from
your phone, and retrieve it on your phone or another
phone. You can also perform this function on non-dis-
play phones.
Own phone
Select and confirm the option shown.
Enter the destination number.
The call is now parked.
\ Replace the handset.
If "Park" is not available, you will receive acoustic and
also visual notification.
Confirm and continue the call.
or
\ Replace the handset. You will receive a recall for the call
on hold.
Retrieving a parked call
Destination phone
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
Confirm the option shown.
Park to station?
Return to held call?
Park retrieve?