Making Calls – Convenience Functions
73
Step by step
System-wide speaker call
You can place a speaker call from your phone to any in-
ternal party with a telephone equipped with speaker-
phone mode or a loudspeaker.
Speaker call to a variable destination
Prerequisite: You have programmed the function
"Speaker call-one-way" on a key Æ page 83.
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
S Press the "Spkr. 1-way" sensor key.
j Enter the internal number of the party.
A connection is immediately established to this destina-
tion station’s loudspeaker if
• the station is not busy
• the handset has not been lifted
• "Speaker call protect" is not activated
Z The caller hears a confirmation tone when the connec-
tion is established and they are free to start speaking.
^ The called party can accept the connection by lifting the
handset.
n or S If the called party presses the speaker key or the line
key (if configured), the connection is lost.
Speaker call to a fixed destination
Prerequisite: The system code for "Speaker call-one-
way" and the destination number are programmed on
the repdial key Æ page 88.
S Press the programmable repdial key. A connection to
the destination loudspeaker is immediately established.
The same number of speaker calls and normal
connections is possible.
To Next Page
Loading...
