Siemens LMV36.520 Series - 23 Operating the AZL2; Description of Unit;Display and Buttons

155/248
Building Technologies Division Basic documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 23 Operating the AZL2... unit 25.09.2013
23 Operating the AZL2... unit
23.1 Description of unit/display and buttons
Function and operation of unit versions AZL21… and AZL23… are identical.
Bild 1/0809
P
V
hmin
s%
VSD
ESC
/
reset
AF
Figure 93: Description of unit/display and buttons
Button Function
F
Button F
- For adjusting the fuel actuator
(keep
F
depressed and adjust the value by pressing or )
A
Button A
- For adjusting the air actuator
(keep
A
depressed and adjust the value by pressing or )
V
SD
AF
Buttons A and F: VSD function
- For changing to parameter setting mode P
(press simultaneously
F
and
A
plus or )
/reset
Info and Enter button
- For navigating in info or service mode
* Selection (symbol flashing) (press button for <1 s)
* For changing to a lower menu level (press button for 1…3 s)
* For changing to a higher menu level (press button for 3…8 s)
* For changing the operating mode (press button for >8 s)
- Enter in parameter setting mode
- Reset in the event of fault
- One menu level down
- button
- For decreasing the value
- For navigating during curve adjustments in info or service mode
+ button
- For increasing the value
- For navigating during curve adjustments in info or service mode
ESC
+ and - button: Escape function
(press
and simultaneously)
- No adoption of value
- One menu level up