Siemens LMV36.520 Series - 26 Info Level

170/248
Building Technologies Division Basic documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 26 Info level 25.09.2013
26 Info level
The info level displays information about the basic unit and about operation in general.

Note
On the info level, you can display the next or the previous parameter by pressing
or .
Instead of pressing , you can also press
/
reset
for <1 s.

Note
Press
ESC
or
/
reset
for >3 s to return to the normal display.

Note
P
Vh
min s %
Bild 27e/0807
Parameter
Parameter value
Fig. 96: Info level
No change of values on the info level!
If the display shows below the parameter value, the value may consist of more
than 5 digits.
The value is displayed by pressing
/
reset
for >1 s and <3 s.
Press
/
reset
for >3 s or press
ESC
to return to the selection of the parameter
(parameter no. flashes).