EasyManua.ls Logo

Siemens LMV36.520 Series - 2 Makeup of Structure; Function Description; Lmv36; For North American

Siemens LMV36.520 Series
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23/248
Building Technologies Division Basic documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 2 Makeup of structure / function description 25.09.2013
2 Makeup of structure / function
description
2.1 LMV36...
The LMV36... is a microprocessor-based burner management system with matching
system components for the control and supervision of forced draft burners of medium to
high capacity.
For using of dual fuel with 2 fuel actuators, AGM60... switch unit is required.
Following are integrated in the LMV36...:
Burner management system complete with valve proving system
Electronic fuel-air ratio control system for a maximum of 2 SQM3... or SQN1...
actuators
Control of VSD for air fan
Modbus interface
Figure 6: Makeup of structure
Example: Dual fuel burner, gas modulating and oil 3-stage
2.2 For North American
For intermittent operation in connection with the LMV36…, / AGM60... the ionization
probe or the QRA... or QRB... optical flame detectors can be used. Continuous
operation is possible only when using an ionization probe and without AGM60...

Table of Contents

Other manuals for Siemens LMV36.520 Series

Related product manuals