Siemens LMV36.520 Series - Change of Heating Engineers Password

181/248
Building Technologies Division Basic documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 28 Parameter level 25.09.2013
P
Vh
min s %
Bild 55/0707
The display no longer flashes.
Example: Burner identification 9993
ESC
P
V
hmin
s%
Bild 49/0707
Press
ESC
to return to the parameter level.
PArAmeter 113: for burner identification.
28.3 Change of heating engineer’s password
P
Vh
min
s%
Bild 56/0707
Parameter 041: flashes.
Press
/
reset
to go to level c: for password changes.
/
reset
P
Vh
min
s%
Bild 57/0707
Letter n: for new.
Proceed as described in chapter Entry of password and
enter the new password (4 characters).
After entry of the last character, the password must be
confirmed by pressing
/
reset
.
/
reset
P
Vh
min
s%
Bild 58/0707
Letter r: for repeat.
Proceed as described in chapter Entry of password and
repeat entry of the new password.
After entry of the last character, the password must be
confirmed by pressing
/
reset
.
P
Vh
mi n
s%
Bild 59/0707
SEt confirms that the new password has been saved.
P
Vh
min
s%
Bild 56/0707
Parameter 041: flashes again.