185/248
Building Technologies Division Basic documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 28 Parameter level 25.09.2013
Adopt the value!
reset
ESC
Discard the change!
P
Vh
mi n
s%
Bild 67/0707
Press
reset
to return to editing mode.
The value set is adopted.
P
Vh
mi n
s%
Bild 68/0707
Press
ESC
to return to the parameter
level.
Display: Parameter 208: flashes, value 0
does not.
Note
To detect potential display errors, the value is
displayed 1 place shifted to the right.
Display: Value 2
ESC
P
Vh
mi n
s%
Bild 69/0707
Press
ESC
to return to the parameter level.
PArAmeter 208: flashes, value 2 does not.
ESC
Press
ESC
to return to the parameter level.
PArAmeter 200: for basic units.
To the next parameter level
Back to the previous
parameter level
To Next Page
Loading...
