Parameterdarstellung auf Basis der Menüstruktur AZL - Ebene «OEM» - Auslieferstand Siemens Landis&Staefa
Menu level 1 Menu level 2 Menu level 3 Menu level 4 Menu level 5 Menu level 6 Description Value range Access
rights
Default
parameter
setting
LMV51 LMV52
126/278
Siemens Building Technologies Basic Documentation LMV51... CC1P7550en
HVAC Products 7 Display and operating unit AZL5... 01.10.2003
Standardize Standardizing the flame signal OEM x x
StandardFactor Reading/reseting the standard factor OEM x x
RepetitCounter Displaying the repetition counters OEM x x
HeavyOil Rep. counter: immediate start heavy oil 1..16 OEM 3 x x
StartRelease Rep. limit value: start prevention 1..16 OEM 10 x x
SafetyLoop Rep. limit value: safety loop 1..16 OEM 16 x x
ValveProving Settings for valve proving OEM x x
ValveProvingTyp
e
Type and time of proving test No VP
VP startup
VP shutdown
VP stup/shd
OEM VP
shutdown
x x
Config_PM-
VP/CPI
Configuration of input on PM-VP or CPI PS-VP
CPI
OEM PS-VP x x
VP_EvacTme Proving test evacuation time 0.2..3 s OEM 3s x x
VP_TmeAtmPre
ss
Proving test test time atmospheric pressure MinT_VP_AtmPress..63 s OEM 10s x x
VP_FillTme Proving test filling time 0.2..3 s OEM 3s x x
VP_Tme_GasPr
ess
Proving test test time gas pressure MinT_VP_GasPress..63 s OEM 10s x x
ProductID Displaying the burner control's HW version User x x
ASN Type reference 1..15 characters User "LMV52.200
A2"
x x
ProductionDate Production date 01.01.00..31.12.99
01-01-00..12-31-99
User - x x
SerialNumber Serial number 0..65535 User - x x
ParamSet Code Preselected parameter set: customer code 0..255 User 20 x x
ParamSet Vers Preselected parameter set: version 0..65535 User 400 x x
SW Version SW version of burner control 0..65535 User - x
SW Version 0..65535 User - x
RatioControl Parameter settings for ratio control User x x
GasSettings Parameter settings for firing on gas Service x x
SpecialPosition
s
Setting the special actuator positions for firing on gas Service x x
To Next Page
Loading...
Need help?
General
