Technical Instructions LMV Series
Document No. LV5-100
0
Section 1 Page 12 SCC Inc.
Flame Scanner Accessories
QRA75 Wiring Cable – Qty (1) Required per QRA75.A17 Flame Scan
ner
A pre-made 12 foot cable is requir
ed when using the QRA75 flame scanner. For more
information, refer to Document No. N7712.
AGM23U
Pre-made 12 foot cable for use
with the QRA75…
flame scanner, supplied with 1/2” NPSM conduit
adapter.
QRI… Accessories - Optional
Mounting accessories are available for bot
h the forward viewing and side viewing QRI… flame
scanners. For more information, refer to Document No. N7719.
AGG2.110
Kit for mounting forward viewing scanner
QRI2A2.B180B on a flame tube. Comes with clamp,
mounting sleeve, thermal barrier with 3/4” NPSM
connection, and heat insulation glass
AGG2.120
Pg9 thread to 1/2” NPSM con
duit connection
adapter for use with any QRI… flame scanner
AGG90.U
Right angle adapter for mounting
side viewing
scanner QRI2B2.B180B on a flame tube. Comes
with 3/4” NPSM female thread connection
LMV5-XPR-QRI
Explosion proof housing for any QRI… flame
scanner
To Next Page
Loading...
Need help?
General
