Installation 5 - 11
Siemens AG SPB7-230.814.01 Page 11 of 24 Opdima
Medical Solutions Rev. 01 10.04 CS PS 24 Installation
5. If the workstation table stands on an uneven floor, it can be adjusted with the
adjustable screws on the framework.
6. Place the workstation, the monitor, the keyboard and the mouse on the tabletop.
Make sure that all the equipment is within the edges of the tabletop.
7. Let the cables from the workstation, the monitor, the keyboard and the mouse
pass through the hole at the back of the tabletop.
8. Mount the MO unit shelf on the right below the tabletop (1/Fig. 11).
9. Place the MO unit to the right on the shelf (1/Fig. 11).
OPD00611
EJECT
POWER
BUSY
1
Fig. 11 MO Shelf
To Next Page
Loading...
