Siemens MCP 398C Operation/Programming

4
Creating a ShopTurn Program 08/2005
4
♥ Siemens AG, 2005. All rights reserved
4-142 SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
Teach TC
position
 Press the "Teach TC position" softkey if you want to set the
current position of the tool as a tool change point.
The tool’s coordinates are adopted by the parameters XT and ZT.
 Press the "Accept" softkey.
The work plan is displayed.
ShopTurn has automatically defined the end of the program.

Siemens MCP 398C Specifications

General

Brand	Siemens
Model	MCP 398C
Category	Control Systems
Language	English