7
G Code Program 08/2005
7.3 G-code editor
7
♥ Siemens AG, 2005. All rights reserved
7-350 SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
G code: Copying
îš¾ Select the G code that you want to copy.
Copy
îš¾ Press the "Copy" softkey.
The G code is stored in buffer memory and remains there even if you
switch to another program.
G code: Pasting
îš¾ Copy the G code that you want to insert.
Insert
îš¾ Press the "Insert" softkey.
The copied G code is pasted from buffer memory into the text in front
of the cursor.
G code: Cutting
îš¾ Select the G code that you want to cut.
Cut
îš¾ Press the "Cut" softkey.
The selected G code is removed and stored in buffer memory.
G code: Find
Search
îš¾ Press the "Search" softkey.
A new vertical softkey bar appears.
îš¾ Enter the character string that you want to locate.
îš¾ Press the "OK" softkey.
The G code program is searched for the character string in the
forward direction. The character string is marked in the editor by the
cursor.
Find next
îš¾ Press the "Find next" softkey to continue the search, as
necessary.
The next character string found is displayed.
To Next Page
Loading...
Need help?
General
