Running the descaling programme
User action Appliance response
7.
Reset water meter (since last descaling)
Fill tank with 1.2 l of water (rinsing), Press Steam button
DISPLAY
Fill water and press Steam button
8.
Check point: Water in tank? (Via flowmeter)
Rinsing via drip tray, coffee outlet and steam pipe
DISPLAY
Rinsing
9.
Rinsing via drip tray
Solenoid valve open, up to 150 ml have run through. Discharge into drip tray
When tank becomes empty: back to step 8
Pump clock speed: Draw coffee
Rinsing via coffee outlet
Pump ON until 500 ml have flown through
When tank becomes empty: back to step 8
Pump clock speed: Draw coffee
Rinsing via steam pipe
Solenoid valve open until tank is empty
Pump OFF, close solenoid valve
Empty drip trays and capsule container
DISPLAY
Empty container
10.
Check point: IR sensor trays
11.
Time window
Trays removed > 5 seconds
DISPLAY
Service
- until drip trays have been reinserted
- until brewing temperature has been reached
- until spindle motor has moved into upper end position
58300000116013_en_a – 21.08.06 Seite 29 von 61
To Next Page
Loading...
