Running the descaling programme
User action Appliance response
Descaling programme ends
DISPLAY
Ready
12.
The descaling alarm is cancelled
Amount of descaling mixture:
0.6 litres
(0.5 litres of water + 0.1 litres of descaling agent)
Amount of rinsing water:
1.2 litres
(full tank)
Thermal block control while descaling solution is being conveyed:
70 °C
(Fluid temperature at thermal block outlet)
Thermal block control during rinsing process:
70 °C
(Fluid temperature at thermal block outlet)
If the appliance is switched off while the descaling programme is running:
► irrespective of where the programme is, the programme automatically jumps to Point 8 when the appliance is switched on (to keep
descaling agent out of the appliance).
► At the moment the appliance was switched off, the programme had completed step 6: descaling warning on the display is cancelled.
► At the moment the appliance was switched off, the programme had not yet completed step 6: descaling warning on the display is
retained.
58300000116013_en_a – 21.08.06 Seite 30 von 61
To Next Page
Loading...
