Siemens RDF301.50 Series - ACS Service and Operating Tool

80 / 92
Siemens RDF301, RDF301.50..., RDF600KN, RDF600KN/VB, RDF600KN/S Basic Documentation CE1P3171en
Smart Infrastructure 2020-02-21
5.2.1 Parameter settings in ACS
In the ACS program, select Plant, then Open to open the plant.
To start the parameter settings, select Applications, then Plant engineering…:
The application and control parameters can be adjusted and downloaded.
Column Line no. contains the parameter number as shown in the parameter table.
Refer to section 3.13, control parameters.