62 / 94
Siemens RDF301, RDF301.50..., RDF600KN, RDF600KN/S Basic Documentation CE1P3171en
Building Technologies 2017-12-07
3.12 Communication objects (S-Mode)
3.12.1 Overview
Page Object # and name Thermostat Object # and name Page
14 1 System time
14 3 Time of day
14 44 Outside temperature 21 Room temperature 14
16 Room operating mode:
State
1)
15
16 12 Room operating mode:
Time switch
1
)
24 Room temperature:
Current setpoint
27
16 7 Room operating mode:
Preselection
1)
15, 18,
51
20 Room operating mode:
Window state
33 Fan operation
(0 = Auto / 1 = Manual)
48
15, 18,
49
45 Room operating mode:
Presence detector
3)
35 Fan output 48
27 22 Room temperature:
Comfort basic setpoint
36 Fan stage 1 48
27 23 Room temperature:
Comfort setpoint
37 Fan stage 2 48
24 46 Room temperature:
Economy heating setpoint
3)
38 Fan stage 3 48
24 47 Room temperature:
Economy cooling setpoint
3)
36 31 Application mode 25 Heating output primary
58
48 32 Enable fan command value 26 Heating output secondary
58
48 34 Fan command value 27 Cooling output primary
58
39, 52 29 Enable electric heater
39/40 X1 (temperature / digital) 52
39, 52 29 Enable electric heater 41/42 X2 (temperature / digital) 52
32, 51 30 Heating/cooling changeover 5 Fault state 34,
59
59 6 Fault transmission 4 Fault information 34,
50
r!
Boo
kma
rk
not
defi
ned.
, 59
45.. Buttons left: ON/OFF 60
45.. Button top left: ON/OFF 60
46.. Button bottom left: ON/OFF 60
47 Buttons left: Dim up/down 60
48 Buttons left: Blind step/stop 60
RDF301.50… 49 Buttons left: Blind up/down 60
RDF600KN/S
only
2)
50 Buttons left: Scene 60
51.. Buttons right: ON/OFF 60
51.. Button top right: ON/OFF 60
53.. Button bottom right: ON/OFF 60
53 Buttons right: Dim up/down 60
54 Buttons right: Blind
step/stop
60
55 Buttons right: Blind up/down 60
56 Buttons right: Scene 60