Siemens SC 7000 - Page 152

Service Manual SC 7000 and SC 9000XL Patient Monitors
136 Siemens Medical Systems, EM-PCS, Danvers ASK-T898-03-7600
NOT A CONTROLLED DOCUMENT
7k9kXLSM.apd.CD_ROM.fm/04-99/kaupp
8 SpO2 Function
_______
8.2 Waveforms/Digital Readouts/Tones _______
8.3 Pulse Tone Generator _______
8.4 Limits Alarm _______
9 Temperature Function (MultiMed POD)
_______
9.2 Digital Readout
Temp A
_______
Temp B________
9.3 Temperature Calibration _______
10Non-Invasive Blood Pressure Function
_______
10.2 Calibration _______
10.3 Hardware Overpressure _______
10.4 Pump _______
10.5 Interval Mode _______
10.6 Safety Timer _______
11etCO2 Function
_______
• Sensor Cal. _______
• Sensor Zero _______
• Measured Value w/ Manual Atm. Press._______
• Measured Value w/ AUTO Atm. Press._______
12HemoMed Pod
12.1 Invasive Blood Pressure Function _______
12.1.2 HEMO Channel A (Aux./Hemo3 input)
• Monitor Zero Function _______
• Monitor Pressure Reading _______
12.1.2 HEMO Channel A (Aux./Hemo2 input, SC 9000XL only)
• Monitor Zero Function _______
• Monitor Pressure Reading _______
12.1.2 HEMO POD Channel B_______
12.1.2 HEMO POD Channel C_______
12.1.2 HEMO POD Channel D_______
12.2 Cardiac Output Function _______
• Blood temperature ______
• Injectate temp ______
13HEMO POD 2/4
13.1 Invasive Blood Pressure Function _______
13.1.2 HEMO Channel A (Aux./Hemo3 input)_______
• Monitor Zero Function _______