Installation
5.3 Inserting media modules and SFP transceivers
SCALANCE X-300
118 Operating Instructions, 10/2010, A5E01113043-10
1. Select the required SFP media module in the slot of the
device. (Example: X-308-2M, slot 2)
2. Open the clip on the selected SFP and remove the blind
plug.
Close the clip again.
3. Insert the SFP with the clip closed in the SFP media
module.
Notice: Closing the clip after insertion does not lock the
device in the rack.
To Next Page
Loading...
