Siemens SCALANCE X-300

Approvals, certificates, standards
9.8 MM900 product group
SCALANCE X-300
238 Operating Instructions, 10/2010, A5E01113043-10
9.8 MM900 product group
9.8.1 MM900 approvals, certificates
NOTICE
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET product meets the requirements of the EC Directive:2004/108/EEC
"Electromagnetic Compatibility".
The product is designed for use in the following areas:
Requirements Area of application
Emission Immunity
Industrial area EN 61000-6-4: 2007 EN 61000-6-2: 2005
WARNING
Use only approved components
The installation of components, accessories and expansions that are not approved for
SIMATIC NET products or their target systems may violate the requirements and
regulations for safety and electromagnetic compatibility.
Only use components that are approved for the system.