Siemens SCALANCE X-300

Approvals, certificates, standards
9.6 Product group X-300M PoE
SCALANCE X-300
230 Operating Instructions, 10/2010, A5E01113043-10
9.6 Product group X-300M PoE
9.6.1 X-300M PoE approvals, certificates
Note
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET product meets the requirements of the EC Directive 2004/108/EEC
"Electromagnetic Compatibility"
The product is designed for use in the following areas:
Requirements Area of application
Emission Immunity
Industrial area EN 61000-6-4:2007 EN 61000-6-2:2006
WARNING
Permitted expansions
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.