Siemens SENTRON 7KM PAC2200 - Page 91

Technical specifications
8.1 Technical specifications
PAC2200
Equipment Manual, 12/2019, L1V30415167B-03
89
Communication ports
Conductor cross-section for copper cable (Cu)
Rigid 0.14 ... 1.5 mm²
[AWG 26 ... 16]
Flexible 0.14 ... 1.5 mm²
[AWG 26 ... 16]
Flexible with end sleeve, without plastic
sleeve
0.25 ... 1.0 mm²
[AWG 24 ... 18]
Flexible with end sleeve and plastic
sleeve
0.25 ... 1.5 mm²
[AWG 24 ... 16]
2-wire, same cross-section
Rigid 0.14 ... 0.75 mm²
[AWG 26 ... 19]
Flexible 0.14 ... 0.75 mm²
[AWG 26 ... 19]
Flexible with end sleeve, without plastic
sleeve
0.25 ... 0.5 mm²
[AWG 24 ... 20]
Flexible with TWIN end sleeve and plas-
tic sleeve
0.5 ... 1.0 mm²
[AWG 20 ... 18]
Tightening torque 0.5 ... 0.6 Nm
[4.4 ... 5.3 lb-in]