Description
2.2 Measuring inputs
PAC2200
16 Manual, 05/2018, L1V30415167B-02
Two connection types have been provided. The device can be used in TN and IT networks.
Table 2- 1 Available connection types
3 phases, 4 conductors, unbalanced load
1P2W (not MID devices) 1 phase, 2 conductors, unbalanced load
The input circuit of the device must correspond to one of the connection types listed. Select
the suitable connection type for the purpose.
Connection examples can be found in chapter Connection (Page 39)
The wrong system connection can destroy the device.
Before connecting the PAC2200, you must ensure that the local power supply conditions
agree with the specifications on the rating plate.
The short code of the connection type must be entered in the device settings at startup. You
can find the instructions for parameterizing the connection type in chapter Commissioning
(Page 57).
To Next Page
Loading...
