Siemens SENTRON PAC2200 - Page 19

Description
2.2 Measuring inputs
PAC2200
Manual, 05/2018, L1V30415167B-02
17
Display of the measured variables depending on the connection type
The table below shows which measured values can be represented depending on the
connection type.
The availability of the measured variables depends on the type of readout.
Depending on the device version, several different readout types are available:
● Device display
● ModbusTCP
● ModbusRTU
● M-Bus
● Web server
Table 2- 2 Display of the measured variables depending on the connection type
Connection type
Measured variable
3P4W
1P2W
Voltage L
1-N
✓
✓
Voltage L
2-N
✓ —
Voltage L
3-N
✓
—
Voltage L
1-2
✓
—
Voltage L
2-3
✓
—
Voltage L
3-1
✓
—
Current L
1
✓
✓
Current L
2
✓
—
Current L
3
✓
—
Apparent power L
1
✓
✓
Apparent power L
2
✓
—
Apparent power L
3
✓
—
Active power L
1
✓
✓
Active power L
2
✓
—
Active power L
3
✓
—
Reactive power L
1
✓
✓
Reactive power L
2
✓
—
Reactive power L
3
✓
—
Total apparent power
✓
✓
Total active power
✓
✓
Total reactive power
✓
✓
Power factor L
1
✓
✓
Power factor L
2
✓ —
Power factor L
3
✓
—
Total power factor ✓ ✓
Frequency
✓
✓
Average voltage L - N
✓
—