Technical data
8.1 Technical data
PAC2200
Manual, 05/2018, L1V30415167B-02
79
The specified conductor cross sections describe the capacity of the connection terminals.
When selecting the conduction cross sections, always pay attention to the possible current
load and ensure adequate cable protection.
2
2
2
2
Flexible with end sleeve, without plastic
0.2 ... 4 mm
2
0.75 ... 25 mm
2
Flexible with end sleeve and plastic
0.25 ... 4 mm
2
0.75 ... 25 mm
2
2-wire, same cross-section
2
2
2
2
Flexible with end sleeve, without plastic
0.25 ... 0.75 mm
2
0.75 ... 4 mm2
Flexible with TWIN end sleeve and plastic
0.5 ... 2.5 mm
2
0.75 ... 4 mm
2
Tightening torque 0.5 ... 0.6 Nm [4.4
3 Nm [26.6 lb-in]
2
2
Flexible with end sleeve, without plastic
sleeve
0.25 ... 1 mm
2
Flexible with end sleeve and plastic
sleeve
0.25 ... 1.5 mm
2
2-wire, same cross-section
2
2
Flexible with end sleeve, without plastic
0.25 ... 0.5 mm
2
Flexible with TWIN end sleeve and plas-
0.5 ... 1 mm
2
0.5 ... 0.6 Nm [4.4 ...5.3 lb-in]
To Next Page
Loading...
