Siemens Simatic 6ES7 157-0AD81-0 A0 Series User Manual

Technical Specifications
B-4
DP/PA Link and Y Link Bus Couplings
A5E00193841-011
!
Warning
There is a risk of injury and damage to property.
In areas where there is a risk of explosion, injuries and damage may be caused if
you remove connectors during operation.
In areas where there is a risk of explosion, always deenergize all components in
order to remove the connectors.
Certification in Australia
The described components comply with the requirements of the
AS/NZS 2064 (Class A) standard.
IEC 61131
The described components comply with the requirements and criteria of the IEC
61131-2 standard (programmable logic controllers, Part 2: Equipment requirements
and tests).
PROFIBUS standard
The described components are based on the standard IEC 61784-1:2002 Ed1
CP 3/1.
PROFIBUS-PA
The DP/PA coupler meets the requirements and criteria of the PROFIBUS-PA
directive.
Use in industrial enrivonments
SIMATIC products are designed for use in industrial environments.
Table B-1 Use in industrial enrivonments
Area of application Requirements
Emitted interference Noise immunity
Industry EN 50081-2 : 1993 EN 50082-2 : 1995

Siemens Simatic 6ES7 157-0AD81-0 A0 Series Specifications

General

Brand	Siemens
Model	Simatic 6ES7 157-0AD81-0 A0 Series
Category	Industrial Equipment
Language	English