iii
DP/PA Link and Y Link Bus Couplings
A5E00193841-011
Preface
Purpose of the manual
This manual contains everything you need to know to configure, install, wire and
commission the DP/PA link and Y link couplers.
Required basic knowledge
The following basic knowledge is necessary to understand this manual:
General knowledge in the field of automation technology
Familiarity with the use of computers or PC-related equipment (e. g.
programming devices) under the Windows 2000 or NT operating system
Skills in the use of STEP 7. These are imparted in the manual entitled
”Programming with STEP 7 V5.2”.
Scope of this manual
This manual applies for the following products:
IM 157: 6ES7 157-0AA82-0XA0 (as of firmware version V4.0.0)
DP/PA coupler Ex [i]: 6ES7 157-0AD81-0XA0
DP/PA coupler: 6ES7 157-0AC80-0XA0
Y coupler: 6ES7 197-1LB00-0XA0
BM PS/IM bus module: 6ES7 195-7HA00-0XA0
BM IM/IM: 6ES7 195-7HD80-0XA0 bus module
BM DP/PA coupler bus module: 6ES7 195-7HF80-0XA0
BM Y coupler bus module: 6ES7 654-7HY00-0XA0
Complete package consisting of the above-mentioned components:
6ES7 197-1LA01-0XA0
It describes the components valid at the time of the manual’s publication. We
reserve the right to enclose a product information document containing current
information with new components and new releases of components.
To Next Page
Loading...
Need help?
General
