Preface
v
DP/PA Link and Y Link Bus Couplings
A5E00193841-011
Standards
The DP/PA link and Y link couplers meet the requirements and criteria of the
IEC 61784-1:2002 Ed1 CPF 3 PROFIBUS and PROFInet.
Additional information on the standards this equipment complies with and the
issued approvals is found in Appendix B.
Position in the information landscape
In addition to this manual, you will also require the following manuals, depending
on the hardware you are using:
The manual of the DP master being used, especially the following information:
– Configuration and commissioning of a DP master system
– Description of the DP master
The manual entitled SIMATIC NET, PROFIBUS Networks
(order no. 6GK1 970-5CA10-0xA0)
The installation manual entitled Automation System S7-300, Installation
(order no. 6ES7 398-8AA03-8xA0)
The manual entitled Automation Systems S7-300, M7-300, ET 200M Ex I/O
Modules (order no. 6ES7 398-8RA00-8xA0), especially the information on the
subject of intrinsic safety and explosion protection.
Manual guide
This manual is subdivided into the following topics:
Product overview and description of components
Installation, wiring and commissioning
Operation and diagnostics
Appendices
Important terminology is explained in the glossary.
The index will help you rapidly find the text passages associated with specific
keywords.
Recycling and disposal
The described components can be recycled on account of their low-emission
materials. To recycle or dispose of your used equipment in an
environmentally-compatible manner, turn to a disposal company certified for
electronics scrap.
To Next Page
Loading...
Need help?
General
