2-64
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
Documenting your System Configuration
If you have made any modifications to your standard SETUP settings, you can
enter them in the following table. You therefore have easy access to the values you
have set if you have to make any hardware modifications later.
System Parameter Standard Settings Your Entries
Diskette A 3.5 in., 1.44 Mbyte
Diskette B Not installed
Hard Disk 1 Submenu: Autotype Fixed Disk
user xxx Mbyte
Hard Disk 2 Not installed
Memory Cache Submenu: Enabled
Cache: Enabled
Memory Shadow Submenu: Enabled
System: Enabled
Video Enabled:
Boot Sequence A: then C:
Numlock On
FI Hardware Options
PCI-MPI/DP
Internal COM1:
Internal COM2:
Internal LPT1:
LPT Mode:
CRT resolution:
CRT 640 x 480:
CRT 800 x 600:
CRT 1024 x 768:
Internal mouse:
Submenu
Enabled
3F8, IRQ4
2F8, IRQ3
378, IRQ7
output only
75 Hz
75 Hz
75 Hz
Internal
Motherboard
To Next Page
Loading...
