Siemens SIMATIC Box PC 820 - Opening and Closing the Housing of the Box PC 820

1-9
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
1.3.1 Opening and Closing the Housing of the Box PC 820
S Close the application you are using.
S Remove the diskette or CD-ROM from the drive.
S Pull out the power supply connector.
S Remove the PC from its support.
S Remove the seven screws on the rear housing plate.
Housing top plate
Fastening screws
Rear housing plate
Figure 1-6 Opening the Housing of the Box PC 820
System Unit
Siemens Distributor
StockCheck.com