2-51
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
2.14.2 The Advanced Menu
Menu Structure
PhoenixBIOS Setup-Utility
Item Specific Help
F1
ESC
Help
Exit
Select Item
Select Menu
+ / –
Enter Select
Change Values F9
F10
Setup Defaults
Save and Exit
Sub-Menu
Main Security Power VersionAdvanced
Installed O/S: [Other]
Reset Configuration Data: [Yes]
Local Bus IDE adapter:
Floppy disk controller: [Disabled]
[Primary & Secondary]
Large Disk Access Mode: [DOS]
Memory Gap at 15 Mbyte: [Disabled]
COM / LPT Configuration
PCI Configuration
Hard Disk Pre-Delay: [Disabled]
Default Primary Video adapater: [AGP]
Exit
Boot Sequence
Peripheral Configuration
Enable Memory ECC: [ECC Scrub]
Figure 2-16 “Advanced” Menu
Settings in the Advanced Menu
Installed O/S means that fitted modules are automatically recognized and installed
provided they support plug & play functions.
[Other] The BIOS handles the complete plug & play facilities
[Win98] The operating system handles some of the plug & play
functions
Reset
Configuration
Data
[Yes] All previous functions under Plug & Play are deleted, and
the configuration is retriggered the next time the system is
loaded. The entry is then set to [No]. System components
which have no Plug & Play facilities must be entered
manually.
[No] The system components with Plug & Play facilities are
initialized the next time the system is loaded.
Floppy disk
controller
Enable or disable the floppy controller of the basic module.
Local Bus IDE
adapter
[Primary] One IDE interface for up to two drives.
[Secondary]
[Primary and Secondary]Two IDE interfaces for up to four drives.
[Disabled] No local IDE interface
Large Disk
Access Mode
[DOS] The drive tables are designed according to DOS drive
access operations compatible with enhanced IDE.
[OTHER] The tables are not adapted.
Motherboard
Siemens Distributor
To Next Page
Loading...
