3-7
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
Examples for Configuring a Key
Example 1 (PC FI45 V2, Upper mode):
Function: Key is to send the character code for the character ‘A’ and, when used in
combination with the shift key, the character code for the character ‘(’.
Parameter Assignment
KEY 76 3B 80 3F 19 81 ; KEY A, (
Comment
Introductory character for the comment
Attribute 2 for upper mode, here; key
has auto-repeat function
AT code 2 for upper mode: running
number of the key (see Figure 3.2)
here:19 for ’(’ key
IO attribute
Attribute 1, here: key has auto-repeat
function
AT code 2 for upper mode: running
number of the key (see Figure 3.2),
here: 3B for ’A’ key
Matrix number : 1st digit: X matrix node
of the key. 2nd digit: Y matrix node of
the key (see Figure 3.3)
Keyword, introduces parameter
assignment of keys
Keyboard Controller (PC FI45 V2)
Siemens Distributor
To Next Page
Loading...
