3-10
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
Example 4 (Direct keys in connection with the direct key module)
Function: Special key S1 is not to send any key code, but instead serve as a direct
key with the number 5 and the function ‘touch.’
Parameter Assignment
KEY 28 FF 00 3F < C4 > ; KEY S1
Comment
Introductory character for comment
Direct key 5 has the function ’touch’.
Parameter = function code (here)
COhex + direct key number –1
Introductory character for parameter
assignment of direct key
IO attribute
Attribute 1
AT code 1: running number of the key
(see Figure 3.2), here FF (do not send
key code)
Matrix number : 1st digit: X matrix node
of the key, 2nd digit: Y matrix node of
the key (see Figure 3.3)
Keyword, introduces parameter
assignment of key
End character for parameter
assignment of direct key
Keyboard Controller (PC FI45 V2)
To Next Page
Loading...
