1-19
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
!
Caution
Damage may be caused to the device!
Operating the PC with the wrong supply voltage setting may damage the device.
The same voltage is applied to the supply voltage output as to the supply voltage
input.
Please observe the specifications made by the monitor manufacturer when
operating the monitor.
The following table lists the permissible input currents for the monitor:
Input voltage 120 V / 240 V ± 10%
Input current 8A / 4A
Output voltage Equal to input voltage
Max. output current 3A / 1.5A
!
Caution
You must remove the power supply connector before changing the supply voltage.
Operating a power supply unit set to 115V in conjunction with a 230V network may
cause serious damage to the PC.
System Unit
Siemens Distributor
To Next Page
Loading...
