2-2
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
Section PageDescription
2.8.21 Assignment of the PS/2 Power Connector, X80 2-25
2.8.22 Assignment of the PS/2 Power Connector, X90 2-25
2.8.23 Assignment of the PS/2 Power Connector, X100 2-25
2.8.24 Assignment of the PS/2 Power Connector, X120 2-25
2.8.25 Assignment of the Fan Supply, X26, X30 2-26
2.8.26 Assignment of the MPI/DP D Sub-Socket Connector, X800 2-26
2.8.27 Ethernet RJ45 Connection, X921 2-27
2.8.28 USB (two high current USB Interfaces Type A), X901 2-27
2.8.29 Description of the Switch Positions S2 (TTY, BIOS) 2-28
2.9 Interrupt Assignments 2-29
2.10 Hardware Adresses 2-30
2.10.1 I/O Address Assignment 2-30
2.10.2 Assignment of the Memory Addresses 2-32
2.11 Monitoring Functions 2-33
2.11.1 Overview 2-33
2.11.2 Status Displays 2-33
2.11.3 Temperature Monitoring/Temperature Display and Fan Control 2-34
2.11.4 Watchdog (WD) 2-35
2.11.5 Software Interfaces 2-35
2.12 Interrupt Assignment (Hardware) 2-36
2.13 DMA Channels 2-37
2.14 Changing the System Configuration with BIOS SETUP 2-38
2.14.1 The Main Menu 2-41
2.14.2 The Advanced Menu 2-51
2.14.3 The Security Menu 2-57
2.14.4 The Power Menu 2-59
2.14.5 The Boot Sequence Menu 2-61
2.14.6 The System Version Menu 2-62
2.14.7 The Exit Menu 2-63
2.15 Diagnostic Messages (Port 80) 2-65
Motherboard
To Next Page
Loading...
