2-58
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
Settings
Supervisor
Password is
[Disabled] Password is not active
[Enabled Password is active. Changes the BIOS Setup can only be
made after the password has been entered. A user password
can be entered.
When the password is entered, the field is automatically switched from
[Disabled] to [Enabled] .
User
Password is
[Disabled] Password is not active
[Enabled] Password is active. BIOS-Setup can only be opened after the
password is entered. No changes can be made, except to the
user password.
When the password is entered, the field is automatically switched from
[Disabled] to [Enabled] .
Set
Supervisor
Password
This field opens the ” Enter Password” dialog box. After the supervisor
password has been entered, it can be modified, deleted with the ”
Return” key and deactivated.
Set User
Password
This field opens the ” Enter Password” dialog box. After the user
password has been entered, it can be modified, deleted with the ”
Return” key and deactivated.
Password on
boot
[Disabled] No password required on booting.
[Enabled] Supervisor- oder user-password must be entered on booting.
Fixed disk
boot Sector
Normal All types of access to the hard disk are permitted.
protected No operating system can be installed. This also provides
protections against boot viruses.
Diskette
access
only valid for
LS 120 drives
This protection is only active, if Password on boot ” is [enabled].
Supervisor: Access to the diskette is only possible if the supervisor
password was entered on booting.
User Access to the diskette is only possible if the user password
was entered on booting.
Motherboard
To Next Page
Loading...
