Siemens SIMATIC IPC PX-39A PRO - Page 25

Configure firmware
2.4 "Advanced" tab
Firmware/BIOS description SIMATIC IPC BX-39A, IPC PX-39A, IPC PX-39A PRO
Operating Instructions, 01/2023, A5E51110693-AA
25
"CIRA Configuration"
Calling "CIRA Configuration"
Select: "Setup Utility (Page 10)" > "Advanced" > "PCH-FW Configuration" > "AMT
Configuration" > "CIRA Configuration".
Firmware setting Value Setting in deliv-
ery state
Meaning
IPC BX-39A
IPC PX-39A
IPC PX-39A PRO
Activate Remote Assis-
tance Process
Off
x
CIRA (Client Initiated Remote Access, "Fast Call For Help") is
disabled.
On
CIRA (Client Initiated Remote Access, "Fast Call For Help") is
enabled.
CIRA allows AMT maintenance even if the AMT PC is not in
the intranet.
("Network Access" must be enabled in the Intel® Manage-
ment Engine BIOS Extension (MEBx).)
CIRA Timeout
0..255
0
Timeout in seconds for the connection establishment with
the MPS (Manageability Presence Server).
0 = A default value of 60 seconds is taken for CIRA
Timeout.
255 = The Intel® Management Engine BIOS Extension
(MEBx) waits until the connection is established.