Siemens SIMATIC IPC677D - Page 12

Overview
1.1 Product description
SIMATIC IPC677D
12 Operating Instructions, 09/2014, A5E32995420-AC
Basic data
DisplayPort resolutions depend on the graphics controller in the CPU,
which is represented by the processor:
• Celeron G1820TE: GT1 (HD Graphics),
maximum resolutions up to 2560 × 1600
• Core I3-4330TE: GT2 (HD Graphics 4600),
maximum resolutions up to 3840 × 2160
• XEON E3-1268L v3: GT2 (HD Graphics 4600)
maximum resolutions up to 3840 × 2160
Power supply
• 120 V / 230 VAC, 190 W; wide range
• 24 VDC, 210 W
AC and DC power supply with short-term power failure backup in
accordance with NAMUR: maximum of 20 ms at 0.85 rated voltage.
The 24 VDC power supply is protected against reverse polarity
connection.
Drives and storage media
Hard disk
• 1 × 3.5" ≥ 250 GB, SATA
• 2 × 2.5" ≥ 250 GB, SATA only with
RAID1 system for automatic data mirroring on two hard disks
SSD (Solid State Disk)
2.5" ≥ 240 GB Standard
USB stick
External, can be connected via USB port
DVD drive DVD burner (slimline), optional
• DVD+/-R/RW, CD, CD-RW, DVD-RAM
• Double layer functionality
Interfaces
Ethernet 2 × 10/100/1000 Mbps, (2 x RJ45)
Wake on LAN, Remote Boot and teaming are supported:
PROFIBUS/MPI
12 Mbps, electrically isolated, compatible with CP 5622, optional
PROFINET
3 × 10/100 bps, CP 1616 on-board, RJ45, optional
USB
• Front: 1 × USB 3.0 high current
(only for devices with resistive single touch screen)
• External: 4 × USB 3.0 high current
(a maximum of 2 can be operated as high current at the same
time)
• External, optional: 1 × USB 2.0 high current, 1 × low current
• Internal: 1 × USB 3.0 high current for internal USB stick/dongle
COM
Serial V.24 port
COM2/LPT
optional
Monitor
• 1 x DVI-I (VGA monitors can be connected with a DVI/VGA
adapter acquired separately)
• 1 x DisplayPort