Siemens SIMATIC IPC677D - Removing and Installing an SSD Drive

Expanding the device and assigning device parameters
6.4 Drives
SIMATIC IPC677D
Operating Instructions, 09/2014, A5E32995420-AC
77
6.4.4
Removing and installing an SSD drive
Requirement
● The device is opened.
Procedure
Removal
1.
Remove the drive bay module.
2.
Disconnect the power supply and
the data cable from the drive.
3.
Loosen the screws ①
of the drive.
4.
Remove the drive from the bay.
Installation
Proceed in reverse order.