Siemens SIMATIC IPC677D - Page 158

Technical information
8.6 BIOS description
SIMATIC IPC677D
158 Operating Instructions, 09/2014, A5E32995420-AC
BIOS Setup settings
Main
System parameters
Default settings
Local settings
System Time
00:00:00
System Date
MM/DD/YYYY
Advanced > Boot Configuration
System parameters
Default settings
Local settings
Numlock
On
POST errors
All without keyboard
Advanced > Peripheral Configuration
System parameters
Default settings
Local settings
Internal COM 1
1
Auto
Base I/O address
1 2
3F8
Interrupt
1 2
IRQ4
Internal COM 2
1
Auto
Base I/O address
1 2
2F8
Interrupt
1 2
IRQ3
Internal LPT
1
Auto
Base I/O address
1 3
378
Interrupt
1 3
IRQ7
Mode
1 3
Bi-directional
DMA Channel
1 3
DMA 1
Onboard PROFINET
1
Enabled
PCI – MPI / DP
1
Enabled
Audio
4
Auto
Onboard Ethernet 1 (LAN 1, X1 P1)
Enabled
Onboard Ethernet 2 (LAN 2, X2 P1)
Enabled
1
Visible depending on the ordered device configuration
2
Only visible if the corresponding parameter "Internal COM #" is enabled.
3
Only visible if "Internal LPT" is enabled.
4
Only available if an Azalia HD audio controller is installed.