Siemens SIMATIC NET CP 443-1 Advanced - 8 Technical Specifications

CP 443-1 Advanced (GX30)
Manual, 03/2019, C79000-G8976-C256-05
109
Technical specifications
8
Table 8- 1 Technical specifications of the CP 443-1 Advanced
Technical specifications
Article numbers
• CP 443-1 Advanced
• CP 443-1 Advanced (conformal
coating)
• 6GK7 443-1GX30-0XE0
• 6GK7 443-1GX30-0XE1
Attachment to Industrial Ethernet
Amount 1 x gigabit interface
1 x PROFINET interface with 4port switch
Design of gigabit interface
Connector
1 x RJ-45 jacks
Transmission speed
10/100/1000 Mbps
Design of PROFINET interface (4port
switch)
Connector
4 x RJ-45 jacks
Transmission speed
10/100 Mbps
When working with PROFINET IO and
PROFINET CBA with cyclic transfer, the
transmission rate of 100 Mbps full duplex is
mandatory.
Aging time (4port switch)
5 minutes
Special features of the X2P1R and
X2P2R ports
Integration in ring topology / MRP possible
Permitted cable lengths (Ethernet)
(Alternative combinations per length range) *
0 ... 55 m
• Max. 55 m IE TP Torsion Cable with IE FC RJ45 Plug 180
• Max. 45 m IE TP Torsion Cable with IE FC RJ45 + 10 m TP Cord via
IE FC RJ45 Outlet
0 ... 85 m
• Max. 85 m IE FC TP Marine/Trailing/Flexible/FRNC/Festoon/Food Cable with
IE FC RJ45 Plug 180
• Max. 75 m IE FC TP Marine/Trailing/Flexible/FRNC/Festoon/Food Cable +
10 m TP Cord via IE FC RJ45 Outlet
0 ... 100 m
• Max. 100 m IE FC TP Standard Cable with IE FC RJ45 Plug 180
• Max. 90 m IE FC TP Standard Cable + 10 m TP Cord via IE FC RJ45 Outlet
Electrical data
Power supply
via S7 backplane bus
5 V
Current consumption
From backplane bus
1.8 A
Power dissipation
7.25 W
Permitted ambient conditions
Ambient temperature
During operation
0 °C to +60 °C
During storage
-40 °C to +70 °C
During transportation
-40 °C to +70 °C