Siemens SIMATIC NET CP 443-1 Advanced User Manual

CP 443-1 Advanced (GX30)
Manual, 03/2019, C79000-G8976-C256-05
53
Installation and commissioning
5
5.1
Important notes on using the device
Safety notices on the use of the device
Note the following safety notices when setting up and operating the device and during all
associated work such as installation, connecting up or replacing the device.
WARNING
Safety requirements for installation
The devices are "open equipment" according to the standard IEC 61010-2-201or UL 508 /
CSA C22.2 No. 142. To fulfill requirements for safe operation with regard to mechanical
stability, flame retardation, stability, and protection against contact, the following alternative
types of installation are specified:
• Installation in a suitable cabinet.
• Installation in a suitable enclosure.
• Installation in a suitably equipped, enclosed control room.
5.1.1
Notices on use in hazardous areas
WARNING
The device may only be operated in an environment with pollution degree 1 or 2 (see IEC
60664-1).
WARNING
EXPLOSION HAZARD
The device must not be opened.

Siemens SIMATIC NET CP 443-1 Advanced Specifications

General

Brand	Siemens
Model	SIMATIC NET CP 443-1 Advanced
Category	Computer Hardware
Language	English