Siemens SIMATIC NET SCALANCE W722-1 User Manual

Configuring with Web Based Management
5.5 "System" menu
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
120 Configuration Manual, 11/2014, C79000-G8976-C350-03
Table 5- 2 TFTP
File type
Save
Down-
load
Config
Start configuration
X
X
ConfigPack Detailed configuration information. for example, start
configuration, users, certificates
X X
CountryList The zip file contains the country list as a csv and as a
pdf file.
X --
Debug
This file contains information for Siemens Support.
X
--
Firmware
Firmware
X
X
GSDML
Information on the device properties
X
--
HTTPS Cert
HTTPS certificate
X
X
LogFile
File with entries from the event log table
X
--
MIB
Private MSPS MIB file "Scalance_w_msps.mib"
X
--
Script
CLI script file
--
X
StartupInfo
Startup log file
X
--
Users
File with user names and passwords
X
X
WLANAuthlog File with entries from the WLAN Authentication Log
(information on successful or failed authentication
attempts)
X --
WLANCert
(in client mode only)
User certificate. You can specify a password for the
user certificate on the WBM page "Load&Save >
Password".
X X
WLANServerCert
(in client mode only)
Server certificate X X
WLANSigRec
(in client mode only)
The zip file contains the following:
• csv file with the measured values of the signal
recorder
• pdf file with the measured values and an addition-
al graphic representation of the measured values.
You will find information about the measured values
and their graphic representation in the section "
Signal
Recorder (Page 193)".
X --

Siemens SIMATIC NET SCALANCE W722-1 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W722-1
Category	Control Unit
Language	English