Siemens SIMATIC NET SCALANCE W722-1 User Manual

Configuring with Web Based Management
5.5 "System" menu
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
145
5.5.11.4
v3 Users
User-specific security settings
On the WBM page, you can create new SNMPv3 users and modify or delete existing users.
The user-based security model works with the concept of the user name; in other words, a
user ID is added to every frame. This user name and the applicable security settings are
checked by both the sender and recipient.
Description
The page contains the following boxes:
●
User Name
Enter a freely selectable user name. After you have entered the data, you can no longer
modify the name.
The table has the following columns:
●
Select
Select the row you want to delete.
●
User Name
Shows the created users.
●
Group Name
Select the group to which the user will be assigned.
●
Authentication Protocol
Specify the authentication protocol. Can only be enabled, if this group supports the
function.
The following settings are available:
– none
– MD5
– SHA

Siemens SIMATIC NET SCALANCE W722-1 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W722-1
Category	Control Unit
Language	English