Siemens SIMATIC NET SCALANCE W722-1 User Manual

Configuring with Web Based Management
5.5 "System" menu
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
161
● There is a Syslog server in your network that receives the log entries. (Since this is a
UDP connection, there is no acknowledgment to the sender)
● The IP address or the FQDN name of the Syslog server is entered on the device.
Description
The page contains the following boxes:
●
Syslog Client
Enable or disable the Syslog function.
●
Server IP Address
Enter the IP address or the FQDN name of the Syslog server.
This table contains the following columns
●
Select
Select the row you want to delete.
●
Server Address
Shows the IP address or the FQDN name of the Syslog server.
●
Server Port
Enter the port of the Syslog server being used.
Procedure
Enabling function
1. Select the "Syslog Client" check box.
2. Click the "Set Values" button.

Siemens SIMATIC NET SCALANCE W722-1 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W722-1
Category	Control Unit
Language	English