Configuring with Web Based Management
5.5 "System" menu
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
116 Configuration Manual, 11/2014, C79000-G8976-C350-03
Restart
Resetting to the defaults
In this menu, there is a button with which you can restart the device and various options for
resetting to the device defaults.
Note
Note the following points about restarting a device:
You can only restart the device with administrator privileges.
A device should only be restarted with the buttons of this menu or with the appropriate
CLI commands and not by a power cycle on the device.
Any modifications you have made only become active on the device after clicking the "Set
Values" button on the relevant WBM page. If the device is in "Trial Mode", configuration
modifications must be saved manually before a restart. In "Autosave mode", the last
changes are saved automatically before a restart.
To Next Page
Loading...
Need help?
General
