Configuring with Web Based Management
5.5 "System" menu
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
127
Configuration
Selecting system events
On this page, you specify how a device reacts to system events. By enabling the appropriate
options, you specify how the device reacts to events. To enable or disable the options, click
the relevant check boxes of the columns.
With Table 1, you can enable or disable all check boxes of a column of Table 2 at once.
Table 1 has the following columns:
●
Shows that the settings are valid for all events of table 2.
●
E-Mail / Trap / Log Table / Syslog / Fault
Enable or disable the required type of notification for all events. If "No Change" is
selected, the entries of the corresponding column in Table 2 remain unchanged.
●
If you click the button, the setting is adopted for all events of table 2.
To Next Page
Loading...
Need help?
General
