Configuring with Web Based Management
5.4 "Information" menu
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
68 Configuration Manual, 11/2014, C79000-G8976-C350-03
The table has the following columns:
●
Shows the interface via which the row entry was learnt.
●
Shows the MAC address of the target device.
●
Shows the IP address of the target device.
●
Shows the type of connection.
– Dynamic
The device recognized the address data automatically.
– Static
The addresses were entered as static addresses.
The device allows you to log occurring events, some of which you can specify on the page of
the System > Events menu. This, for example, allows you to record when an authentication
attempt failed or when the connection status of a port has changed.
The content of the events log table is retained even when the device is turned off.
You cannot configure anything on this page.